Quick Guide to using your Flowermate Hybrid X
Hey! You're probably on this page because you made the great decision to purchase a Flowermat Hybrid X; possibly the most versatile herbal vaporizer.
We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your Flowermate Hybrid X.
Charging the Flowermate Hybrid X
It takes between 90 - 120 mins to charge your Flowermate Hybrid X. You’ll know when it is ready because the battery icon on the screen will show as full.
It’s advisable you charge it plugged into the wall as opposed to a laptop.
You will maximise the life of the battery if you do not leave it plugged in for extended periods of time - i.e overnight.
Perform a quick Burnoff of the Hybrid X's oven.
Once the battery is fully charged, it is worth performing a quick 'burn-off' of the Flowermate Hybrid X's oven. A burn-off will clear any leftover residue from inside the oven.
To carry this out, turn on the dry herb oven by pressing the power button 5 times in quick succession.
Set the temperature to its maximum by using the + and - temperature buttons. Once you have selected the right temperature press the power button for 2 seconds and the oven will begin to heat up.
Leave the oven on for five minutes then let it cool down for 30 seconds. Repeat this process once more and we're ready to vape!
Packing the herb oven with dry herbs/resin/wax.
Press the switch on the top side of the device to open the lid.
You can place your dry herbs into the oven directly or the stainless steel pod. I prefer using the oven direct but it'll be easier to keep clean if you use the capsule.
You'll especially want to use the capsule if using resin or wax as they can get very sticky!
Personally, I prefer using the oven direct but it requires more cleaning!
Place herb into the oven until it is at least ¾ full and pack it down using the dab tool that comes with the device.
Packing the herb oven with oil
When vaping oils or soft wax you should ALWAYS use the capsules.
If vaping oil place cotton inside the capsule and add drops until the cotton is saturated - but be careful to not overfill as this will damage your oven.
Using the herb oven on the Flowermate Hybrid X
Take the glass mouthpiece out of the body of the device and screw it on top of the dry herb oven.
To Activate your Hybrid X press the power button five times within 2 seconds.
You can set the temperature using the + or - buttons. You can change from Fahrenheit to Celsius by holding the + and - together at the same time.
Once you’ve set the temperature, hold the power button to activate the ceramic oven.
Once the device has reached your desired temperature the symbol on the LED screen will indicate it is ready to vape.
Filling the E-Liquid tank of the Flowermate Hybrid X
Unscrew the base of the tank from the chamber and carefully pre-soak the heating coil with your e-liquid.
Proceed to fill the tank from the bottom by tilting it slightly, it's important to avoid getting e-liquid into the central airflow tube!
After filling the tank, replace the base and check for leaks. When you're sure it's all secured, screw it back into the Hybrid X.
Using the Flowermate Hybrid X with E-Liquid
Turn on the mod tank side of the Flowermate Hybrid X by pressing the power button 5 times in quick succession.
You can change the wattage by using the + and - buttons. When vaping CBD it is advisable to vape below 20w.
The Hybrid can reach up to 60w if using suitable E Liquids.
To take a hit, hold the power button and the Hybrid will heat and create vapour instantly for 10 seconds. Suck on the mouthpiece whilst holding the button.
- Tips to make sure you enjoy using your new dry herb vaporizer.
- How to keep your dry herb vaporizer nice and clean.
- Choosing the optimum temperature for your dry herb vaporizer.
We are sure you'll enjoy your Flowermate Hybrid X!
If you have any questions at all, get in touch by contacting us here - we aim to respond within 90 minutes during the day