Quick Guide to using your Pax 2
Hey! You're probably on this page because you made the great decision to purchase a Pax 2; a great looking smart vaporizer.
We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your Pax 2,
You will have the following pieces included in the box:
- Pax 2
- A raised mouthpiece
- Magnetic oven lid
- Magnetic Charger
- 10x Cleaning tools
Charging your Pax 2
The Pax 2 has a unique magnetic charging dock - it snaps right into place as soon as you place the charger near the port on the back of the device.#
You'll know when your pax has reached a full charge when all four LEDs are light - it should take roughly two hours.
Perform a quick burnoff of the Pax 2's oven.
Once the battery is fully charged, it is worth performing a quick 'burn-off' of the Pax's oven. Occasionally residue from the manufacturing process can be left in your vaporizer's oven. This can affect the taste of your first session.
To carry this out, power on the Pax by pressing the power button in the centre of the mouthpiece once.
Leave the Pax 2 oven on for five minutes. Repeat this process once more to complete the burn off process.
Packing your Pax 2
Now our Pax 2 is charged and the burn off is complete, we're ready to get started!
Remove the magnetic oven cover at the bottom of the Pax. Before placing any herb in the oven, first, ensure you have ground your herbs as finely as possible.
The Pax performs best when your herbs are packed firmly and the oven is at least half full.
Choose your mouthpiece
The Pax 2 can be used with either the flat mouthpiece that is fitted into the device or this can be swapped out for the raised mouthpiece.
The flat mouthpiece is great because it is really discreet however, some prefer the natural feel of the raised mouthpiece.
Powering on your Pax 2
To turn the Pax 2 on, press the power button in the centre of the mouthpiece once - the vaporizer should immediately begin to heat up.
Whilst heating up the LEDs will pulsate with a soft purple colour and turn green when it has reached the set temperature.
Changing the temperature settings of your Pax 2
The Pax 2 has four temperature setting. To adjust the temperature you have to put your Pax into temperature mode.
To do this, when the Pax 2 in turn on, hold the power button until the LEDs turn yellow.
Now you can cycle through the four settings by pressing the power button once. Each LED corresponds to a temperature setting with 1 LED being the coolest temperature and 4 being the hottest.
To set your chosen temperature, hold the power button for an extended period again until the LEDs turn from yellow to purple or green.
- Tips for getting the most out of your brand new dry herb vaporizer.
- How to best clean your vaporizer.
- Choosing the right temperature for your dry herb vaporizer.
We are sure you'll enjoy your Pax 2!
If you have any questions at all, get in touch by emailing email@example.com - we aim to respond within 90 minutes during the day